New Nokia E72 Firmware 031,023 (100% Success Has Been Hacked)

[trey7927]

http://c.upanh.com/upload/5/531/CS0.9687639_9418_1.jpghttp://c.upanh.com/upload/5/531/CS0.9687637_9418_1.jpg
http://c.upanh.com/upload/5/531/3L0.9687641_9418_1.jpghttp://c.upanh.com/upload/5/531/CS0.9687634_9418_1.jpg
[/URL]http://c.upanh.com/upload/2/737/2D0.6819219_9418_1.jpg



Download Linkhttp://uploaded.to/file/7r69n5/rm530_031.023_U000.000_prd.uda.exe

- Continue to load the correct files on the FW machine that I would end up at all, then copy overwrite the newly loaded with navifirm FW.

Here is the text version of all the drawing in the bottom! Please control.
http://attimg.dospy.com/img/day_100425/20100425_6ea4b122484f87135740Wh1V2HXwgHxN.jpg (http://uploaded.to/file/7r69n5/rm530...00_prd.uda.exe)
[url]http://attimg.dospy.com/img/day_100425/20100425_b70bafc83fe520731a66Zg7tf35e1O1t.jpg
http://attimg.dospy.com/img/day_100425/20100425_3c9ca0298cf90b4037823GvaXhz3SeKG.jpg
http://attimg.dospy.com/img/day_100425/20100425_77cf4db6a8832b5e138fniR2qnOiEzC2.jpg

1,) Download full official Brush package FW to C: \ Program Files \ Common Files \ Nokia \ DataPackage \
Products \ RM-530 \ rm530_031.023_U000.000_prd.uda.fpsx

2,)Download Hacked file to desktop

3) The third step is Download and installed Phoenix 2010 (http://www.symbiantalk.net/showthread.php?29086-Phoenix-Service-Software-2010.8.4.41526)

4) the phone is switched on and connected to the computer. Do not phone offline. Do not be afraid of a call came in! Unplug the phone's memory card the best pre-(open opportunities much faster)

5)the mobile phone option to adjust the PC Suite.

6) select the file Phoenix - "connected devices

7)select USB and click Apply and then click Close

8)select the Phoenix paper - "manually select device

9) select RM-530 Nokia RM-530 and click OK

10)select the Phoenix product - "device information, when the pop-up page where the corresponding data have your cell phone, that is ready, if there is no information please click on Read. If no information has been read at your own check phone connections. If completed, click Close.

11)select the Brush Phoenix - "firmware upgrade / flat brush
if not directly show your CODE CODE intended for the direct view
12-step, if your own Click here to change CODE, remove the automatic detection of hook options to find your favorite CODE and determined. There is a serious recommendation in Hong Kong and other line 0586668 05866670586202 CODE! I tested with and associated personnel, most of the CODE clean, best compatibility! After the operation the largest deposit boot, taking up C drive minimum!

12)(which the following crucial! Please see!) Brush in the final click Options, click on the interface

13)select the RM530_MC061_ChinaHK_4GB_3.0.fpsx this line, then click delete! Pop-up window choose!

14)select the rm530_031.023_U002.000_prd.uda.fpsx this line! rm530_031.023_U005.000_prd.uda.fpsx！ Some people are rm530_031.023_U005.000_prd.uda.fpsx! Click Edit! ！

15)to select Browse, locate the (desktop) rm530_031.023_U000.000_prd.uda.fpsx (see! Can not choose the wrong!)! Content， Model remains Content, rewritten check still hook up! Re-established. Type above to keep this trip is the Content, Usecase position remains Refurb. At this point click OK!

16)click on "Click here to start (Refurbish) All!! The choice not to vote to retain the data model!!


- After successful power Flash Phone will automatically restart.

- Then you copy files in the directory Patches in memory of the device under the path E / Patches / Open4All RP +. RMP and RP + Install Server. RMP "

- In RomPatcher open Open4All RP +. RMP and Install Server RP +. RMP and select always apply auto.

- Then restart the computer the phone was successfully hacked: hehe:

- Note:If after flash is complete without that RomPatcher then you will have flash your phone again: rofl:

[TheOne]

Information not clear you should explain more. Not everyone know pnht method.

[tbrw]

I'm interested. But I need more info on how to apply this mod.

[Raju]

very nice mate rep+

[FARRUKH]

HERE present E-72 (rm530_031.023) HACK BY PNHT STYLE

just use navifirm to download original firmware of E-72 (rm530_031.023) then using phonix replace following file and refurb u r phone regards !!

Disclaimer: Do this hack at your own risk, you may damage your phone!

Hi all!!

HACK:

This hack is for

E-72 (rm530_031.023)
INSTALLATION:

Follow the same procedure in this thread (NOKIA 5800 V40 HACK BY PNHT) for installing JAF, Navifirm, firmware download and flashing procedure. Note that you need to download the correct files for your correct RM (ex:530).

Once downloaded, unzip and copy the file inside to your firmware files location (C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-530\) and flash your phone.

If JAF doesn't detect your phone, download this file (JAF inifile) to your JAF install location (ex:c:\program files\odeon\JAF).
For those having problems with JAF, follow Parotz's tutorial on how to flash using Phoenix.

Please remember to copy patches to (found in 5800 thread) to your E:\Patches


instead rompatcher+ icon u will get enPDA CWF+ icon thats all its free from any popups and also all the patches works smoothly

Download Link


http://uploaded.to/file/7r69n5/rm530_031.023_U000.000_prd.uda.exe

[mckeinzes]

HERE present E-72 (rm530_031.023) HACK BY PNHT STYLE

just use navifirm to download original firmware of E-72 (rm530_031.023) then using phonix replace following file and refurb u r phone regards !!

Disclaimer: Do this hack at your own risk, you may damage your phone!

Hi all!!

HACK:

This hack is for

E-72 (rm530_031.023)
INSTALLATION:

Follow the same procedure in this thread (NOKIA 5800 V40 HACK BY PNHT) for installing JAF, Navifirm, firmware download and flashing procedure. Note that you need to download the correct files for your correct RM (ex:530).

Once downloaded, unzip and copy the file inside to your firmware files location (C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-530\) and flash your phone.

If JAF doesn't detect your phone, download this file (JAF inifile) to your JAF install location (ex:c:\program files\odeon\JAF).
For those having problems with JAF, follow Parotz's tutorial on how to flash using Phoenix.

Please remember to copy patches to (found in 5800 thread) to your E:\Patches


instead rompatcher+ icon u will get enPDA CWF+ icon thats all its free from any popups and also all the patches works smoothly

Download Link


http://uploaded.to/file/7r69n5/rm530_031.023_U000.000_prd.uda.exe

I want to hack mine, my phone is E72-2 RM-529 I try with JAF and CFW but did not work, someone will have the file .uda but I have a RM-529 V31.023

[skv012a]

Very confused- should i rename the hacked "rm530_031.023_U000_000_prd.uda.fpsx" into "rm529_031.023_U000_850.000_prd.uda.fpsx" and replace it? Or do I just add it to the list of files to flash in Phoenix? I've tried replacing my native 529 file and could not flash because the replacement's checksum didn't match what was in the firmware. So, how exactly do you do this?

[TheOne]

Very confused- should i rename the hacked "rm530_031.023_U000_000_prd.uda.fpsx" into "rm529_031.023_U000_850.000_prd.uda.fpsx" and replace it? Or do I just add it to the list of files to flash in Phoenix? I've tried replacing my native 529 file and could not flash because the replacement's checksum didn't match what was in the firmware. So, how exactly do you do this?

see here http://www.symbiantalk.net/showthread.php?26991-Nokia-5800-v50-Hacked-PNHT-Method-Complete-Step-By-Step-Tutorial/page4

[skv012a]

see here http://www.symbiantalk.net/showthread.php?26991-Nokia-5800-v50-Hacked-PNHT-Method-Complete-Step-By-Step-Tutorial/page4

Thanks man, that makes sense and I wouldn't have guessed when to do the swicharoo.

[stunning]

Nice work and this hack will work untill u format ur phone and after formating the phone need to flash again same way to hack it again..

[mckeinzes]

Someone can help me hack my own, my phone is RM-529 as do I replace the file?

[TheOne]

Write step by step what you did?

[skv012a]

Edit- Done, works. Thanks!

[Ducktail]

I've had an N82 for years now, and so I haven't had much reason to spend time on the "latest and greatest" in the area of hacking your Nokia handset. However, this will soon change. Now I don't quite have the time to search through all those forums and find out what was possible, and if it is still possible, and if not what I should try next. The method posted in this thread seems solid enough, but I have one question (keep in mind I haven't been involved in hacking a phone in about two years...):
Once you "tweaked" your firwmare using Phoenix/JAF, ran ROMpatcher+ and enabled the Open4All-patch; is it then still possible to replace the trivial files on your C:-drive, such as InstallServer.exe? And if that is still an option, can you still have User Data Preservation keep it intact for you over a firmware upgrade?
This sounds like the prefect way to go, so I'm assuming that Nokia fixed it. ;-P

[Anoopnk]

it stuck at unpacking files...its semi hacked.i can see private folder on C ......

[watchmen4891]

I can assure everyone here that this works 200% I just followed the simple steps.
To hack nokia E72 RM-530 software version:031.023 by PNHT method.

1.Download and install Navifirm
2.Download Correct Firmware using Navifirm (for CODE remove the battery)
3.Copy all files to folder C:\Program Files\Nokia\Phoenix\Products\RM-530\
4.download hacked firmware by PNHT
RENAME "rm530_031.023_U000.000_prd.uda" to "rm530_031.023_246.01_UDA_India_CV_prd.uda.fpsx"
4.Copy Nokia Firmware Hack by PNHT to same folder i.e C:\Program Files\Nokia\Phoenix\Products\RM-530\ and overwrite.
5.Download and Install PHOENIX
6.Connect Phone with PC Suite mode
7.Run Phoenix
8.connections:USB1 RM530 Operating Mode:Normal
9.File->Select Scan Products
10.Flashing->Select Firmware Update
11.Select Refurbish
12.Select OK when finish
13.When finish phone will reboot then uncompress Patches.zip to Memory Card Ex. E:\Patches
14.In your phone run RomPatcher and apply Patch for hack your phone

[watchmen4891]

I tried Phoenix Method..oh and rename thie file "rm530_031.023_246.01_UDA_India_CV_prd.uda.fpsx" acc to your firmware.

[ianl]

http://c.upanh.com/upload/5/531/CS0.9687639_9418_1.jpghttp://c.upanh.com/upload/5/531/CS0.9687637_9418_1.jpg
http://c.upanh.com/upload/5/531/3L0.9687641_9418_1.jpghttp://c.upanh.com/upload/5/531/CS0.9687634_9418_1.jpg
[/URL]http://c.upanh.com/upload/2/737/2D0.6819219_9418_1.jpg

Download Linkhttp://uploaded.to/file/7r69n5/rm530_031.023_U000.000_prd.uda.exe

- Continue to load the correct files on the FW machine that I would end up at all, then copy overwrite the newly loaded with navifirm FW.

Here is the text version of all the drawing in the bottom! Please control.
http://attimg.dospy.com/img/day_100425/20100425_6ea4b122484f87135740Wh1V2HXwgHxN.jpg (http://uploaded.to/file/7r69n5/rm530...00_prd.uda.exe)
[url]http://attimg.dospy.com/img/day_100425/20100425_b70bafc83fe520731a66Zg7tf35e1O1t.jpg
http://attimg.dospy.com/img/day_100425/20100425_3c9ca0298cf90b4037823GvaXhz3SeKG.jpg
http://attimg.dospy.com/img/day_100425/20100425_77cf4db6a8832b5e138fniR2qnOiEzC2.jpg

1,)the Brush Pack installation path rm530_031.023_U000.000_prd.uda.fpsx copy the backup to any office.
C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-530\rm530_031.023_U000.000_prd.uda.fpsx Original path in this: C: \ Program Files \ Common Files \ Nokia \ DataPackage \
Products \ RM-530 \ rm530_031.023_U000.000_prd.uda.fpsx

2,)in this post covering the same name file to the original location of the official Brush package.

3) The third step is to open installed Phoenix

4) the phone is switched on and connected to the computer. Do not phone offline. Do not be afraid of a call came in! Unplug the phone's memory card the best pre-(open opportunities much faster)

5)the mobile phone option to adjust the PC Suite.

6) select the file Phoenix - "connected devices

7)select USB and click Apply and then click Close

8)select the Phoenix paper - "manually select device

9) select RM-530 Nokia RM-530 and click OK

10)select the Phoenix product - "device information, when the pop-up page where the corresponding data have your cell phone, that is ready, if there is no information please click on Read. If no information has been read at your own check phone connections. If completed, click Close.

11)select the Brush Phoenix - "firmware upgrade / flat brush
if not directly show your CODE CODE intended for the direct view
12-step, if your own Click here to change CODE, remove the automatic detection of hook options to find your favorite CODE and determined. There is a serious recommendation in Hong Kong and other line 0586668 05866670586202 CODE! I tested with and associated personnel, most of the CODE clean, best compatibility! After the operation the largest deposit boot, taking up C drive minimum!

12)(which the following crucial! Please see!) Brush in the final click Options, click on the interface

13)select the RM530_MC061_ChinaHK_4GB_3.0.fpsx this line, then click delete! Pop-up window choose!

14)select the rm530_031.023_U002.000_prd.uda.fpsx this line! rm530_031.023_U005.000_prd.uda.fpsx! Some people are rm530_031.023_U005.000_prd.uda.fpsx! Click Edit! !

15)to select Browse, locate the C: \ Program Files \ Common Files \ Nokia \ DataPackage \ Products \ RM-530 \ rm530_031.023_U000.000_prd.uda.fpsx (see! Can not choose the wrong!)! Content, Model remains Content, rewritten check still hook up! Re-established. Type above to keep this trip is the Content, Usecase position remains Refurb. At this point click OK!

16)click on "Click here to start rewriting mode】 All!! The choice not to vote to retain the data model!!


- After successful power Flash Phone will automatically restart.

- Then you copy files in the directory Patches in memory of the device under the path E / Patches / Open4All RP +. RMP and RP + Install Server. RMP "

- In RomPatcher open Open4All RP +. RMP and Install Server RP +. RMP and select always apply auto.

- Then restart the computer the phone was successfully hacked: hehe:

- Note:If after flash is complete without that RomPatcher then you will have flash your phone again: rofl:

i'm nt able to download in upload site, will u re-uploading in other site plz. 4-shared maybe ( cz i downloading from phone ). btw, how to backup my firmware now? i will try this one hope it works on my phone

[test004]

guys i dont know what rm is my nokia e72 phone
if i downloader newer rm will it cause problems?
what is rm and how can i find the rm's version of my phone

[chandarakk]

just type *#0000# u will see ur rm

[lantol]

works 100% thank you

[pedram55]

please tell me what other patches available for E72 ?
thanks

[hithamadli]

hi i really appreciate your effort , but i cant understand , i downloaded all the files , and stil dont know where to start , will you help and explain more plz , thnx

[hithamadli]

hi there , will you help me please ,
i noticed that you are online , and you guys are very advanced computer users , but iam not will you explain to me how to hack my nokia e72 firm 031.023 and i will be very thankfull

[Karalhoin]

Anyone knows when HelloOx will support E72 031.023? Been ages.

[willian.ad]

Someone managed to hack the E72-2 RM 529 V31.23 who can teach me step by step what I do, thank you.

[chandarakk]

Someone managed to hack the E72-2 RM 529 V31.23 who can teach me step by step what I do, thank you.

use phoniex flash with eidt uda file

[willian.ad]

But I do not know how to use flash with phoniex Eidt uda file, have as you teach me if it is not too bothered, thanks.

[chandarakk]

But I do not know how to use flash with phoniex Eidt uda file, have as you teach me if it is not too bothered, thanks.

do u have phoniex+full flash file already?

[mrprabh]

hello dear, i tried this method many times, m confused.. m almost expert in software related work but now m in prblm. plz can u do my e72 hack by dis method???? cryya4

---------- Post added at 07:27 AM ---------- Previous post was at 07:25 AM ----------

plz sir plz onence rply me

---------- Post added at 07:28 AM ---------- Previous post was at 07:27 AM ----------

u can contact on my email.. prabh.chauhan@yahoo.com

[vishalindia]

very very confuse in this method any know how to hack easy like 1 or 3 step hacking !!
it is also knowledge for very deep in this method !

[David]

very very confuse in this method any know how to hack easy like 1 or 3 step hacking !!
it is also knowledge for very deep in this method !

this is easyest way. use jaf insted phoniex

[mckeinzes]

Some one had hacked E72-2 RM-529 V51.018 ???