Nokia n96 flash problem !!!

[lapte2000]

I flashed my nokia n96 with Phoenix and i got this error message:

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
1. Make sure USB cable, Battery and charger are removed from device.
2. Insert USB cable to device
3. Insert Battery to device
4. Insert Charger to device
--- Press phone's power button! ---
Loading secondary boot code: 39104 bytes
Secondary boot loaded
Loading update server code: 407169 bytes
Update server loaded
Loading slave secondary boot code: 15168 bytes
Slave secondary boot code loaded
Loading slave update server code: 462152 bytes
Slave update server loaded
Partitioning....
Partitioning complete
Erasing....
Erasing complete
Asic CMT: Start programming 6310 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic APE: Start programming 125663 KB...
Asic APE: Programming data sent: 0%
Asic APE: Programming data sent: 10%
Asic APE: Programming data sent: 20%
Asic APE: Programming data sent: 30%
Asic APE: Programming data sent: 40%
Asic APE: Programming data sent: 50%
Asic APE: Programming data sent: 60%
Asic APE: Programming data sent: 70%
Asic APE: Programming data sent: 80%
Asic APE: Programming data sent: 90%
Asic APE: Programming data sent: 100%
Asic APE: Programming data sent: 100%
Asic APE: Programming data sent: 100%
Programming complete
ERROR: Programming error reported for asic CMT
-- Error Type 0x01
-- Error Specifier 0x06
-- Offending Addr 0x003E0000
-- Expected content 0x000095A3
-- Detected content 0x000095A3
Asic APE: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Waiting for communication response: 23
Waiting for communication response: 22
Waiting for communication response: 21
Waiting for communication response: 20
Waiting for communication response: 19
Waiting for communication response: 18
Waiting for communication response: 17
Waiting for communication response: 16
Waiting for communication response: 15
Waiting for communication response: 14
Waiting for communication response: 13
Waiting for communication response: 12
Waiting for communication response: 11
Waiting for communication response: 10
Waiting for communication response: 9
Waiting for communication response: 8
Waiting for communication response: 7
Waiting for communication response: 6
Waiting for communication response: 5
Waiting for communication response: 4
Waiting for communication response: 3
Waiting for communication response: 2
Waiting for communication response: 1
Error 0x8401F121 communicating to phone. Unable to verify comm.
Warning: Unable to communicate to product after flashing
All operations completed
Product flashing failed.


any one knows how to fix the phone ???

[shijinmathew]

i suggest u 2 use JAF for flashing bro.!! :)
cheerz..!

[lapte2000]

i suggest u 2 use JAF for flashing bro.!! :)
cheerz..!

JAF don`t show any errors but the phone is still dead

[Mobilewarriorsymbian]

I suggest ur phone 2 power on n put in water for 5 min.


haha

[Lestat]

I suggest double checking you have correct firmware files for your RM and product code with navifirm.
Then reflash using dead phone method:
How-To-Flash-Dead-Phones-Using-Phoenix-Or-JAF-Service-Suite (http://www.symbiantalk.net/showthread.php?20542-How-To-Flash-Dead-Phones-Using-Phoenix-Or-JAF-Service-Suite)

[lapte2000]

I suggest double checking you have correct firmware files for your RM and product code with navifirm.
Then reflash using dead phone method:
How-To-Flash-Dead-Phones-Using-Phoenix-Or-JAF-Service-Suite (http://www.symbiantalk.net/showthread.php?20542-How-To-Flash-Dead-Phones-Using-Phoenix-Or-JAF-Service-Suite)


firmware version , product code , everything is correct , and i used that method and still can`t fix the phone

[jillyronald]

Set from the control panel of my settings. There are so many options and enable it, After enabling restart your instruments. Set the setting of the firmware, product code and also re-flash files, I hope this information is good and useful for your dead phone.

[lapte2000]

Set from the control panel of my settings. There are so many options and enable it, After enabling restart your instruments. Set the setting of the firmware, product code and also re-flash files, I hope this information is good and useful for your dead phone.

i don`t understand what settings ?? tell me what option to enable ???

[lapte2000]

Set from the control panel of my settings. There are so many options and enable it, After enabling restart your instruments. Set the setting of the firmware, product code and also re-flash files, I hope this information is good and useful for your dead phone.

i don`t understand what settings ?? tell me what option to enable ???

[jasminjany]

The JAF is working very best in flash. I working it from last two years, it is such a very much amazing and best application. Its all options are user familiar as well as very easy to use.