Hacking Symbian Mobiles
As of 23rd June 2011, the only method of hacking a symbian mobile is by flashing it with a cooked firmware.Inspite of being posted so many times am posting this tutorial again because i see there is a lot of requests by members asking help for their cert and key file, although that is practically use less.
Please try this method which is fairly simple and i have tried my best to make it easily understood.
1. Nokia OVI Suite (Installed to PC for backup of personal data )
2. NavifirmPlus (Installed to PC for Download of Firmware)
3. Nokia Cooker (Installed to PC For Editing the Firmware)
4. Installserver For [v9.1]/[v9.2]/[v9.3/v9.4]/[S^3] (Compatible with the phone model)
5. RompatcherLite (For hacking)
6. Phoenix Software Suite (Installed to PC for Flashing Mobile)
Type the code *#0000# in the standby screen to open the Device Manager\Updates of your Nokia Phone and please note down the type <RM-XXX> and firmware version.
Open the back panel to remove the battery and please note down the product code of your mobile too.
Scroll\Search your phone model and match the RM code.
Now select the firmware version and download the firmware in accordance with the product code of your mobile to your computer.
Open Nokia Cooker v1.1.
If it shows, old version and closes itself, please change the year of your system date to 2010 and open again.
Using the cooker go to the location of the downloaded firmware and open a file with the extension “prd.uda.fpsx”
Now you will be able to see the some folders inside the Nokia Cooker Window.
Drag and Drop Installserver.exe compatible with your mobile to :SYS\BIN
Extract the rompatcher lite files.
Now copy the *.ldd files to :SYS\BIN
Now press the save firmware to save the firmware.
This is a hacked UDA file which can be used to flash your file using phoenix.
Once you save the uda file, a backup file with “prd.uda_BACKUP_.fpsx” extension is created which is not needed.
Now go to the products folder in the installed location of phoenix.
Default will be
Now create a folder with the RM code, which is same as that of your mobile.
Now copy all the firmware files to this location, excluding the “prd.uda_BACKUP_.fpsx” file which is not necessary as already mentioned above in Step 8.
Connect your mobile phone using your USB cable in PC Suite Mode.
Open Phoenix Suite
The Phoenix Suite will recognize your mobile’s RM code with the corresponding USB Port.
Now go to File and Select “Scan Product”.
Please Note : Some Mobiles switch off on selecting "Scan Product" option from File Menu if then just select "Open product from file" and go to Step 16
Your mobile’s RM code, firmware version etc will now be displayed at the bottom of the phoenix window.
Make sure that the Operating Mode is set to Normal.
Now in the menu bar, go to “Flashing” and Select “Firmware Update”
A new popup window will open inside the phoenix suite which will show you the Product Code, Software version and the variant version.
If the popup is empty please click the [...] on the tab, and select your RM-XXX code.
Now the popup will fill up with the info about your phone.
Now select refurbish to begin the flashing process.
At first phoenix will check for the connectivity after which the flashing process will take place which usually takes abt 5-10 minutes.
After the process has completed, a popup appears stating that the flashing has finished.
Disconnect your USB Cable,
Apply the open4all patch for accessing system folders.
U can install any unsigned/signed apps in your mobile.
Mobile thus hacked
Enjoy a hacked mobile..!!!
In between the source of my tutorial is this very forum.
For dead phones, please refer the tutorial by our admin Raju
If any1 need hacked uda file for their mobile reply to this thread and i will try to help you guys out.
These are Hacked UDA Files, download if of any use to you guys:-
1. Nokia C5-00 Black rm645_071.005_U000.000_prd.uda.fpsx
2. Nokia C6-01 Black RM-718_014.002_03.01_79.92_prd.uda.fpsx