Hacking Symbian Mobiles
As of 23rd June 2011, the only method of hacking a symbian mobile is by flashing it with a cooked firmware.Inspite of being posted so many times am posting this tutorial again because i see there is a lot of requests by members asking help for their cert and key file, although that is practically use less.
Please try this method which is fairly simple and i have tried my best to make it easily understood.
Requirements:
1. Nokia OVI Suite (Installed to PC for backup of personal data )
2. NavifirmPlus (Installed to PC for Download of Firmware)
3. Nokia Cooker (Installed to PC For Editing the Firmware)
4. Installserver For [v9.1]/[v9.2]/[v9.3/v9.4]/[S^3] (Compatible with the phone model)
5. RompatcherLite (For hacking)
6. Phoenix Software Suite (Installed to PC for Flashing Mobile)
Prerequisites:
Type the code *#0000# in the standby screen to open the Device Manager\Updates of your Nokia Phone and please note down the type <RM-XXX> and firmware version.
Open the back panel to remove the battery and please note down the product code of your mobile too.
Step 1:
Open NavifirmPlus.
Step 2:
Scroll\Search your phone model and match the RM code.
Step 3:
Now select the firmware version and download the firmware in accordance with the product code of your mobile to your computer.Step 4:
Open Nokia Cooker v1.1.
Step 5:
Using the cooker go to the location of the downloaded firmware and open a file with the extension “prd.uda.fpsx”
Now you will be able to see the some folders inside the Nokia Cooker Window.
Step 6:
Drag and Drop Installserver.exe compatible with your mobile to :SYS\BIN
Step 7:
Extract the rompatcher lite files.
Now copy the *.ldd files to :SYS\BIN
Step 8:
Now press the save firmware to save the firmware.
This is a hacked UDA file which can be used to flash your file using phoenix.
Once you save the uda file, a backup file with “prd.uda_BACKUP_.fpsx” extension is created which is not needed.
Step 9:
Install phoenix.
Now go to the products folder in the installed location of phoenix.
Default will be
C:\Program Files\Nokia\Phoenix\Products
Step 10:
Now create a folder with the RM code, which is same as that of your mobile.
C:\Program Files\Nokia\Phoenix\Products\RM-XXX
Now copy all the firmware files to this location, excluding the “prd.uda_BACKUP_.fpsx” file which is not necessary as already mentioned above in Step 8.
Step 11:
Connect your mobile phone using your USB cable in PC Suite Mode.
Step 12:
Open Phoenix Suite
Step 13:
The Phoenix Suite will recognize your mobile’s RM code with the corresponding USB Port.
Step 14:
Now go to File and Select “Scan Product”.
Your mobile’s RM code, firmware version etc will now be displayed at the bottom of the phoenix window.
Step 15:
Make sure that the Operating Mode is set to Normal.
Step 16:
Now in the menu bar, go to “Flashing” and Select “Firmware Update”
Step 17:
A new popup window will open inside the phoenix suite which will show you the Product Code, Software version and the variant version.
Step 18:
Now select refurbish to begin the flashing process.
At first phoenix will check for the connectivity after which the flashing process will take place which usually takes abt 5-10 minutes.
Step 19:
After the process has completed, a popup appears stating that the flashing has finished.
Step 20:
Disconnect your USB Cable,
Install RompatcherLite.sisx.
Step 21:
Apply the open4all patch for accessing system folders.
U can install any unsigned/signed apps in your mobile.
Mobile thus hacked
Enjoy a hacked mobile..!!!
In between the source of my tutorial is this very forum.
For dead phones, please refer the tutorial by our admin Raju
http://www.mobilephonetalk.com/showthread.php?20542
If any1 need hacked uda file for their mobile reply to this thread and i will try to help you guys out.
1. Nokia C6-01 Black RM-718_014.002_03.01_79.92_prd.uda.fpsx
Symbian Flashing Tutorial/Request Hacked UDA for Nokia
Reply With Quote
Originally Posted by thaiviet2536
Bookmarks